| Version 5 (modified by laforge, 2 years ago) (diff) |
|---|
Integrated Site Controller (CLN1480A)
This is a unit that interfaces up to 8 Base Radios with the core network of the Dimetra TETRA network (SwMI).
Hardware-wise, it is a PowerPC based system, looking very much like an old-fashioned PC mainboard with both ISA and PCI slots.
The mainboard houses the PowerPC CPU and it has slots for RAM.
There are some extension cards plugged into the system:
- Clock generation card (ISA, full length).
- has an integrated GPS receiver, to which you attach a GPS antenna
- generates the reference 5MHz clock distributed over Coaxial cable to the Base Radios
- Ethernet Card using DEC tulip chipset (PCI)
- This card is what talks to the Base Radios (BR) via 10-Base-2
- Unknown card with RJ-45 jack (REDUND) on the back. Might be E1
There are further inputs and outputs on the system:
- A DB-15 jack for X.21 synchronous serial backhaul (2048Mbps)
- FIXME
- A RS-232 serial port for local configuration
Images
Site Controller top view (lid removed)
PCI Card with lots of Lucent chips
Attachments
-
tetra_site_controller_open.jpg
(1.4 MB) -
added by laforge 2 years ago.
picture of tetra site controller (top view, lid removed)
-
tetra_site_controller_lucent_pcb_top.jpg
(1.1 MB) -
added by laforge 2 years ago.
top view of the PCI card with lucent chips
-
tetra_site_controller_lucent_pcb_bottom.jpg
(1022.5 KB) -
added by laforge 2 years ago.
bottom view of the PCI card with lucent chips
-
tetra_site_controller_ethernet_pcb_top.jpg
(1.2 MB) -
added by laforge 2 years ago.
Ethernet card
-
tetra_site_controller_clock_pcb_top.jpg
(1.1 MB) -
added by laforge 2 years ago.
clocking ISA card, top view of pcb
-
tetra_site_controller_clock_pcb_bottom.jpg
(1.4 MB) -
added by laforge 2 years ago.
clocking ISA card, bottom view of pcb




